KINETIC ENERGY ABSORBERS WITH ROPE LANYARD

Category: FALL PROTECTION, KINETIC ENERGY ABSORBERS, KINETIC ENERGY ABSORBERS WITH ROPE LANYARD

Product Information

The Kinetic Energy Absorber is an important element of a fall arrest system.
Securing / Supporting Kinetic Energy Absorbers with Rope Lanyards to be used as a connecting element or component of a fall arrest system. The Kinetic Energy Absorber is an important element of a fall arrest system.
It’s function is to limit life threatening impact forces which can occur during a fall. Special ergonomic design ensures that the fall is arrested gradually.
The energy absorber can be fixed at the anchorage point or integrated with the lanyard / fall arrest harness

Rope

Polyamide, minimum 11 mm diameter

Webbing

Polyamide with width 44mm +/-1 mm

Breaking Strength

22 kN

Compliance

Confirms to EN 355:2002

Related Information

915211110B UEE 500 0.9 m, With one side loop, the other side UEE 300 Snap Hook
91553011AB UEE 501 0.9 m, With UEE 302 Snap Hook, other side UEE 302 Karabiner
91553011BB UEE 502 0.9 m, With UEE 300 Snap Hooks on both sides
915530110A UEE 504 0.9 m, With one side UEE 302 Karabiner, other side loop
9155301100 UEE 505 0.9 m, With loops on both ends
91553011AA UEE 506 0.9 m, With UEE 302 Karabiners on both sides
91553011AC UEE 507 0.9 m, With one side UEE 301 Scaffold Hook, other side UEE 302 Karabiner
915530110C UEE 508 0.9 m, With one side UEE 301 Scaffold Hook, other side loop
915530110E UEE 509 0.9 m, With one side UEE 307A Anchorage Device, other side loop
91553011AF UEE 510 0.9 m, With one side UEE 307B Anchorage Device, other side UEE 302 Karabiner
91553011BG UEE 511 0.9 m, With one side UEE 307C Anchorage Device, other side UEE 300 Snap Hook